8
2.2 Unpacking
Your ROCKY-P218BXA Single Board Computer contains
sensitive electronic components that can be easily damaged by
static electricity.
In this section, we describe the precautions you should take
while unpacking, as well as during installation. It is very
important that the instructions be followed correctly, to avoid
static damage, and to successfully install the board.
The system board should be done on a grounded anti-static mat.
The operator should be wearing an anti-static wristband,
grounded at the same point as the anti-static mat.
Inspect the cardboard carton for obvious damage. Shipping and
handling may cause damage to your board. Be sure there are no
shipping and handing damages on the board before processing.
After opening the cardboard carton, exact the system board and
place it only on a grounded anti-static surface component side
up.
Again inspect the board for damage. Press down on all the
socketed IC's to make sure that they are properly seated. Do this
only with the board place on a firm flat surface.
Note: DO NOT APPLY POWER TO THE BOARD IF IT HAS
BEEN DAMAGED.
You are now ready to install your ROCKY-P218BXA Single
Board Computer.
Summary of Contents for ROCKY-P218BXA Pentium II & Creative Sound
Page 2: ......
