ICP Electronics POS-566 User Manual Download | Manualshive

Page: 1 / 56

background image

POS-566/566L Ver2.x

AMD-K6

®

-2/ K6

®

-III / Pentium

®

Processor

Multimedia POS Control Board

V:a

©Copyright 1999 by ICP Electronics Inc. All Rights Reserved. Manual second
edition on May .20,2000.

The information in this document is subject to change without prior notice in order
to improve reliability, design and function and does not represent a commitment on
the part of the manufacturer.

In no event will the manufacturer be liable for direct, indirect, special, incidental, or
consequential damages arising out of the use or inability to use the product or
documentation, even if advised of the possibility of such damages.

This document contains proprietary information protected by copyright. All rights
are reserved. No part of this manual may be reproduced by any mechanical,
electronic, or other means in any form without prior written permission of the
manufacturer.

Trademarks

POS-566/566L is a registered trademark of ICP Electronics Inc. IBM PC is a
registered trademark of International Business Machines Corporation. Intel is a
registered trademark of Intel Corporation. AMI is a registered trademark of
American Megatrends, Inc. Other product names mentioned herein are used for
identification purposes only and may be trademarks and/or registered trademarks
of their respective companies.

.

1
2
3
...
»

Summary of Contents for POS-566

























































Reviews:

No comments

Related manuals for POS-566

Brand: dbx Pages: 2

NetStructure ZT 5515

Brand: Intel Pages: 90

Brand: SUNRICH TECHNOLOGY Pages: 5

8677 - BladeCenter Rack-mountable - Power Supply

Brand: IBM Pages: 126

Brand: Idis Pages: 85

Brand: EZCast Pages: 24

Brand: Xilinx Pages: 27

Kontron CP3005 Series

Brand: S&T Pages: 115

Braswell Series

Brand: Intel Pages: 54

Brand: Kordis Pages: 31

Brand: Vxl Pages: 4

Brand: Westermo Pages: 22

Brand: Classe Audio Pages: 70

Brand: MACHINIST Pages: 15

Brand: peplink Pages: 111

Brand: Allied Telesis Pages: 2

Brand: XMOS Pages: 10

Brand: ADF Web Pages: 20

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands