background image

 

7

 

Communications

 

Testing

 

Once the ZT-2000 I/O device has joined the ZigBee network, the signal quality 
can be confirmed by monitoring the status of the ZigBee Net LED indicators. If 
the LED indicator shows a steady light, communication with the ZT-2000 I/O 
device has been successfully established for data acquisition and control. 
ICP DAS also provides the “DCON Utility”, which can be used to simulate 
DCON/Modbus communication. This software can alse be used to verify the 
device settings and ZigBee I/O functions. 

※ 

The DCON Utility can be downloaded from: 

http://ftp.icpdas.com/pub/cd/8000cd/napdos/driver/dcon_utility/

 

 

mulating I/O channel operation via the DCON Utility   

Si

1.

 

Launch the DCON Utility and select the appropriate COM Port settings to connect 
to the ZigBee Coordinator (ZT-2550/ZT-2570). 

2.

 

Click the “Search” button to start searching for ZT-2000 I/O devices connected 
to the same ZigBee network. 

3.

 

If any ZT-2000 I/O devices are found, they will be displayed in the device list 
windows. Double-click the name of the module to start the operating platform. 

ICP

 

DAS,

 

ZT

2024

 

Quick

 

Star,

 

Version

 

1.0.0

   

Page

 

7

 

Copyright

 

©

 

2014

 

by

 

ICP

 

DAS

 

Co.,

 

Ltd.

 

All

 

Rights

 

Reserved.

 

Summary of Contents for ZT-2024









Reviews: