ICP
DAS,
ZT
‐
2024
Quick
Star,
Version
1.0.0
Page
5
Copyright
©
2014
by
ICP
DAS
Co.,
Ltd.
All
Rights
Reserved.
5
Starting
the
ZT
‐
2000
I/O
Device
As the ZigBee network is controlled by the ZigBee Coordinator, the
ZT-2550/ZT-2570 (ZigBee Coordinator) must be configured first. Refers to the
documents shown below for full details of how to configure these devices.
Once configuration of the ZigBee Coordinator has been completed, set the “Pan
ID” and “RF Channel”values for the ZT-2000 I/O device to the same values as
the network and then reboot the device.The module will automatically start to
function on the ZigBee network using the default protocol.
※
Documents
http://ftp.icpdas.com.tw/pub/cd/usbcd/napdos/zigbee/zt_series/document/zt-255x/
http://ftp.icpdas.com.tw/pub/cd/usbcd/napdos/zigbee/zt_series/document/zt-257x/
※
Configuration Utility
(Used to configure the ZT-2000 I/O device
Coordinator)
http://ftp.icpdas.com.tw/pub/cd/usbcd/napdos/zigbee/zt_series/utility/
