WP-8000-CE7 Series User Manual, version 1.0.2 Page: 161
Copyright © 2020 ICP DAS Co., Ltd. All Rights Reserved.
E-mail: [email protected]
When WinPAC as a slave using COM2 communication interface, the pull-high/pull-low resistor
located on the power board must adjust to disabled as shown below.
When WinPAC as a slave using COM3 communication interface, the pull-high /pull-low resistor
located on the power board must set to “Slave” as shown below.
COM3
Master
Slave
COM2
Power Board
JP1: Pull-Low Disable
JP2: Pull-High Disable