WP-8000-CE7 Series User Manual, version 1.0.2 Page: 159
Copyright © 2020 ICP DAS Co., Ltd. All Rights Reserved.
E-mail: [email protected]
When WinPAC as a master using COM2 communication interface, the pull-high/pull-low resistor
located on the power board must adjust to enable as shown below.
When WinPAC as a master using COM3 communication interface, the pull-high/pull-low resistor
located on the power board must adjust to enable as shown below.
COM2
Power Board
JP1: Pull-Low Enable
JP2: Pull-High Enable
COM3
Master
Slave