ICP DAS USA WP-2641M-CE7 User Manual Download Page 16

Page: 16 / 152

WP-2641M-CE7 (WinCE7 Based) User Manual v 1.0.1 Page: 16

Getting Started

This chapter provides a guided tour of the WP-2641M-CE7 installation and configuration that describes

the steps needed to download, install, configure, and run the basic procedures for user working with the

WP-2641M-CE7 for the first time.

Before starting any task, please check the package contents. If any of the following package contents are

missing or damaged, contact your dealer, distributor.

WP-2641M-CE7

Quick Start Guide

A microSD card and

a micro SD/SD adapter

Screw Driver

(1C016) 2.4 mm

Wire Terminal * 16

GSM/GPRS External

Antenna (ANT-421-04)

GPS Active External

Antenna (ANT-115-03)

The following items are included with mobile network expansion card

Summary of Contents for WP-2641M-CE7

























































































































































Search results

Summary of Contents for WP-2641M-CE7

Reviews:

Related manuals for WP-2641M-CE7

Brands by name

Popular brands

ICP DAS USA WP-2641M-CE7, User Manual

Search results

Summary of Contents for WP-2641M-CE7

Reviews:

Related manuals for WP-2641M-CE7

Brands by name

Popular brands