WF-2572
, Ethernet to Wi-Fi Bridge (V1.00, 2018/09/30) 19
4.4.2 Setting step
The WF-2572 has three steps. The setting step shows as following:
Step1.
Set WF-2572 to “Infrastructure” mode and Wi-Fi parameter
1.
Change “Mode” to “Infrastructure”
2.
Set AP SSID
3.
Set authentication of Wi-Fi
4.
Set password of Wi-Fi
5.
Set device MAC. If you didn’t know the device’s MAC, you can refer to chapter
3.3.2.
6.
Click “Write Setting” to save setting
Figure 4-5. Infrastructure setting step
Step2.
Set Computer’s IP
1.
Please set the computer’s IP to 192.168.255.10 and 192.168.255.11.
Figure 4-6. set computer IP
1
2
3
4
5
6
