3.2 Windows NT 4.0
3.2.1 Installation
Please refer to the “
Release Note
” paper to see the software location and
refer to the following steps to complete it.
1. Launch the “
VxCardNT.exe
” setup program, and then click the “
Next >
”
button.
2. When prompted, click the “
Next >
” button to start installation. Or click the
“
Change…
” button to select a new folder first for the installation.
3. After the driver is installed, click the “
Finish
” button.
4. When prompted, select the “
Yes, I want to restart my computer now.
”
option, and then click the “
Finish
” button to reboot the computer.
Note:
After the installation is completed, users must restart the
computer to start the driver.
Note:
It’s recommended to install the software first, and then the
hardware. This reduces the reboot times of your computer.
3.2.2 Verification
ICP DAS provides a ”
VxCard Utility
” program (VxCardUtil.exe) for users to
see all the COM ports on the system. It shows COM ports in two gorups, one for
VXC Card and one for others. So, users can check if any confliction occurred
between COM ports.
To launch the utility, just double-click on the ”
VxCard Utility
” short-cut on
your desktop.
VXC Cards User’s Manual (Ver. 1.1, 06/09.2005, pmh-012-01) -----18
