VXC-112(i)(A)U/142(i)AU/182i(A)U/114(iA)U/144(i)U, VEX-114(i)/144(i) , VEX-112(i)/142(i) User’s Manual (Ver. 1.5
Aug.10 2012) -----21
3.
Software Installation
ICP DAS provides following device drivers for most operation systems such as Windows
NT 4.0 and Windows 2000/XP/2003/2008/Vista32/Windows 7 (32 / 64 bits). These Windows
drivers provide full interrupt-driven, buffered I/O for each COM ports. And also supports the
Plug & Play mechanism for easy installation.
VxCard_W7_v2.08.00.exe:
This is the VXC/VEX Card driver for Windows NT 4.0, 2000/XP/2003/2008/ Vista32 and
Windows 7 (32 / 64 bits).
For Windows users to access COM ports, please refer to the “
Serial Communications in
Win32
” article for programming information. It can be found by searching on the
http://msdn.microsoft.com.
This chapter shows you the detail steps to install these drivers.
Note:
For more information about COM port number selection, please refer to
Section 2.2
“COM Port Mapping & Board ID”
.
Note:
Please refer to “
Quick Start
” for getting the location of setup program on CD.