USB-87P1/2/4/8 User Manual, version: 1.4
31
In conclusion, if an I-87K I/O module does not install correctly under
Auto Config. Enable
mode, it will be forbidden to function and you can
’t search or configure it in DCON Utility
Pro.
For example, the
Auto Config. Enable [X,X,O,O]
in Status column means that the
configuration for modules in first two slots are not completed or not corrected. You need
c
lick “
USB-87P4
” to set these I/O modules.
In the configure window
, you can see the scanned module name in ”Scanned I/O“ column.
Click the
Set As Scanned
button to assign module name and click "
Configure
" to setup
the I/O module according to the user
’s demand. Finally click
Write to 87PN
for the settings
to take effect.
1
3
2
