P.2
1.
Preparations for Devices
Prepare one
UA-5200
(Ex: UA-5231), and the following:
1. PC/NB
: Can connect to the network and set the network
2. Ethernet Hub or Switch
(Ex: NS-205A)
3. Power Supply
: +1
2 ~ +48 VDC
(Ex: MDR-60-24)
2.
Hardware Connection
Connect the UA-5200 with the RJ-45 Ethernet port to an
Ethernet hub/switch and PC. You can also link directly the
UA-5200 to PC with an Ethernet cable.
After power is connected, please
【
wait 1 minute
】
for UA-5200
start-up procedure. When the "RUN/PWR" light starts flashing,
it represents the boot is complete.
Power Supply
(12 ~ 48 VDC)
Ethernet
Cable
Ethernet
Cable
Hub/Switch
P.GND
PWR
+V
-V