Tiny Serial Port Sharer
Copyright © 2018 ICP DAS CO., Ltd. All Rights Reserved.
-32 -
Char Timeout (bytes)
This parameter is used to set the waiting time (based on
bytes) that should elapse after last byte of data of the
response is received from the slave device is activated. If no
more data is received before the timeout period expires,
then the transmission of this packet is deemed to have been
completed and the tSH-700 begins processing the packet.
Valid range: 4 to 15 (bytes)
5
Port Watchdogs
TX Idle (seconds)
If the Tx does not transmit data for a certain period, the
system will be rebooted based on the Tx idle value.
Valid range: 20 ~ 65535 (seconds)
Disable: 0
0
RX Idle (seconds)
If the Rx does not receive data for a certain period, the
system will be rebooted based on the Rx idle value.
Valid range: 20 ~ 65535 (seconds)
Disable: 0
0
Submit
Click this button to save the revised settings to the tSH-700.
