ICP DAS USA TPD-280 User Manual Download Page 71

Page: 71 / 107

TPD/VPD Series HMI Device User Manual

Page: 71

3.4

Downloading Methods for TouchPAD

The downloading applications program to the TouchPAD device is divided into three methods,

RS-485, Ethernet and USB. The detailed wiring and configuration information is as follows:

3.4.1

Setup RS-485-downloaded Devices

The following models use RS-485 to download the HMIWorks-built applications:



TPD-280



TPD-280-H



TPD-280-M1/M2/M3

3.4.1.1

Applications are downloaded through RS-485

The following flow chart describes the RS-485 downloading procedures.

1. Design user interface and program on HMIWork

2. Connect the TPD to the PC using RS-485 wiring

3. Set up Device (TouchPAD) on HMIWorks

4. Rotary Switch set to 1

5. Reboot the TouchPAD

6. Download the Program, Run (F9)

7. Rotary Switch set to 0

8. Reboot the TouchPAD

9. Program run on TouchPAD

Summary of Contents for TPD-280






































































































Search results

Summary of Contents for TPD-280

Reviews:

Related manuals for TPD-280

Brands by name

Popular brands

ICP DAS USA TPD-280, User Manual

Search results

Summary of Contents for TPD-280

Reviews:

Related manuals for TPD-280

Brands by name

Popular brands