22
Wireless Radio Modem Users Manual
Rev:B1.2
2.6 Operation Mode 3
Operation mode 3 is full-duplex, asynchronous communi-
cation configuration. This mode is work by the way of sample
and rebuild. The SST module samples the serial input (RX of RS-
232) and transimit to the other SST module, and receive from RF
to rebuild the serial output (TX of RS-232). For the limitation of
sampling rate, the data waveform may be distorition for higher
data rate.
Jumper Seeting :
Refer
Sec.1.4
for detail
(1) : Channel select is useless
(2) : Select one frequency
(3) : Baudrate select is useless
(4) : Full-duplex
(5) : Select master or slave
(6) : Asynchronous
(7) : RS-232
Benefits :
1. Full-duplex communication
2. Variable data formats
Limitation :
1. Peer-to-peer only
2. Baudrates up to 14400 bps
3. RS-232 interface only
