background image

RFU-433-RU400 (433 MHz RS-232/RS-485 Wireless Modem) User Manual,  Version 1.00

 

Copyright ©  2019 ICP DAS Co., Ltd. All Rights Reserved.                                            Page

 

1.   Introduction 

    The RFU-433-RU400 is an RS-232/RS-485 to 433 MHz radio modem 
that can be used to convert data from an RS-232/RS-485 device to RF 
message  and  transmitted  in  transparent  mode  via  the  433  MHz  ISM 
frequency band. 

 

 
    The  RFU-433-RU400  provides  a  maximum  line  of  sight  (LOS) 
transmission distance of 399 meters at an RF Baud Rate of 9600 bps. In 
order  to  overcome  the interference  that  may  be  encountered  in  harsh 
environments, the RFU-433-RU400 allows the RF transmission Baud Rate 
to be configured to a minimum of 650 bps, enhancing the capability of the 
modem  to  resist  noise  and  other  interference.  Additionally,  the  RF 
channels and Group IDs are adjustable, which is helpful when attempting 
to avoid interference encountered when two RFU-433-RU400 networks 
are adjacent. The 16 RF channels and 8 Group IDs can be configured in 
order to distinguish and control the different RFU-433-RU400 networks. 
The majority of these configuration parameters can be adjusted using a 
combination of the Rotary and DIP switches, thereby providing a simple 
method of maintaining the system if the RFU-433-RU400 modem needs 
to be replaced. 

Summary of Contents for RFU-433-RU400

















Reviews: