ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
107
command to the Modbus RTU module and wait for the response,
the unit will be ms. The setting range will be 1-10000 ms.
Retry Interval: The time interval to wait for PMC/PMD to
repeatedly send command again when PMC/PMD sends
command to the Modbus RTU module and get no response. The
unit will be second. The setting range will be 3 ~ 65535 seconds.
After all settings are completed, click “Save” button to save the
changes.
Please refer to the following sections for more detailed information of
Coil Output, Discrete Input, Input Register and Holding Register
configurations on Modbus RTU Slave module.
Please Note: The number of Modbus address setting blocks will affect
the data update rate for the Modbus RTU Slave module. Please
minimize the number of Modbus address setting blocks; merge the
conjunctive setting blocks to speed up the data update rate for the
communication between PMC/PMD and Modbus RTU Slave module.
The Coil Output Setting of Modbus RTU Module
The Modbus RTU Module Coil Output Setting page is shown as
follow:
Figure7-43 :
Coil Output Setting Page
The settings are as follow:
Data Model: PMC/PMD offers 4 Data Model selections to
match the Modbus RTU Slave module configuration. The Data
Model list is as follow. In this case, please select ”Coil
Output(0x)”.
Summary of Contents for PMC-523 Series
Page 1: ...ICP DAS PMC 523x PMC 224x PMD Power Meter Concentrator Series User Manual Version 3 2 4...
Page 165: ...ICP DAS PMC 523x PMC 224x PMD Series User Manual 150 Figure9 14 The Import of MQTT Topic...
Page 205: ...ICP DAS PMC 523x PMC 224x PMD Series User Manual 190 Figure10 53 PUE Setting Page 2...
