PISO-813 Series Card
32-channel Single-Ended Isolated A/D Board
User Manual, Ver. 1.5, Feb. 2014, PMH-003-15, Page: 17
4.
Software Installation
This chapter provides a detailed description of the process for installing the PISO-813 series driver
and how to verify whether the PISO-813 was properly installed. PISO-813 series card can be used on
DOS, Linux and Windows 98/ME/2000 and 32-/64-bit XP/2003/Vista/7/8 based systems, and the
drivers are fully Plug and Play (PnP) compliant for easy installation.
4.1
Obtaining/Installing the Driver Installer Package
The driver installer package for the PISO-813 series card can be found on the supplied CD-ROM, or
can be obtained from the ICP DAS FTP web site. Install the appropriate driver for your operating
system. The location and addresses are indicated in the Table4-1 and Table 4-2 below.
Table 4-1: UniDAQ Driver/SDK
OS
Windows 2000
、
32/64-bit Windows XP
、
32/64-bit Windows 2003
、
32/64-bit Windows Vista
、
32/64-bit Windows 7
、
32/64-bit Windows 2008
、
32/64-bit Windows 8
CD-ROM
CD:\\ NAPDOS\PCI\UniDAQ\DLL\Driver\
Web Site
http://ftp.icpdas.com/pub/cd/iocard/pci/napdos/pci/unidaq/dll/driver/
Driver Name
UniDAQ Driver/SDK (unidaq_win_setup_xxxx.exe)
Installing
Procedure
For detailed information about the UniDAQ driver installation, please refer to
UniDAQ DLL Software Manual.
The user manual is contained in:
CD:\NAPDOS\PCI\UniDAQ\Manual\
http://ftp.icpdas.com/pub/cd/iocard/pci/napdos/pci/unidaq/manual/
ГК
Атлант
Инжиниринг
–
официальный
представитель
в
РФ
и
СНГ
+7(495)109-02-08 [email protected] www.bbrc.ru
