PET-7H16M Quick Use Manual P11
2.5. Set the number of data acquisition (Sample Count)
The setting value is 0. It indicates Continuous Acquisition mode.
Continue to store data continuously. Press the “Stop” button to
stop the acquisition.
The setting value is greater than 0. It indicates N Sample
Acquisition mode. When the number of acquisition data
reaches the target count, the acquisition will stop automatically.
2.6. After the above steps are completed, press the “Set” button to
write the setting value to the PET-7H16M module.
3. Start AI high speed data acquisition
3.1.
Press the Start button. If the setting value of Sample Count is
greater than 0, the acquisition will be stopped automatically when
it reaches the set value. If the setting value of Sample Count is 0,
you need to manually click Stop button to stop.
3.2.
Select the folder where the data to be displayed is located, and
the folder is layered to 1.IP address 2. Date.
