PCI-82x Series Cards
Multifunction Boards
User Manual, Ver. 1.5, Jan. 2017, PMH-024-15, Page: 37
Step 2:
Set the
JP1 jumper (Analog Input Type)
on the PCI-822/826 Series card to
Single-ended
mode (see
for more details), and then
connect the AO0_Out (Pin18) to the AI0 (Pin1)
,
and
connect the A.GND pin (Pin17) to the A.GND pin (Pin17).
5.2
Execute the Test Program
After installation, the UniDAQ Utility will be located
in the default folder (C:\ICPDAS\UniDAq\Driver\).
Use the procedure described below to perform the
“Self-Test”.
Step 1:
Click the “
Start”
button
point to
“All
Programs”
and then click the
“ICPDAS”
folder. Point
to
“UniDAQ Development Kits”
and then click the
“UniDAQ Utility
” to execute the UniDAQ Utility
Program.
