4.
Wire the signal source to channel 0.
Keep set the JP1 jumper to Single-Ended (page 3), and wire
the signals as follows:
For
PCI-1802
LU/HU:
Connect the AI 0 (Pin1) to signal positive (+)
Connect the A.GND (Pin17) to signal negative (-)
For
PCI-1800
LU/HU:
Connect the AI 0 (Pin1) to signal positive (+)
Connect the A.GND (Pin14) to signal negative (-)
6
PCI-1800/1802 LU/HU Quick Start Guide