ICP DAS USA MDC-700 Series Quick Start Download Page 4

Page: 4 / 4

NOTE:

The MDC-700 can be reset to factory defaults by

shorting the RESET pin to GND pin over 3 seconds. The LED
display will show “RESET” as below and the IP address set
previously will be removed.

STEP 6:

Restore the IP address for your computer.

Go to the Web Site

Go to the web interface at http://xxx.xxx.xxx.xxx, where

xxx.xxx.xxx.xxx is the IP address for your MDC-700.

Module Name

Connection Status

Summary of Contents for MDC-700 Series

Page 1: ...2018 Technical Support M h DC 700 User Manual ttp ftp icpdas com pub cd 8000cd napdos modbus mdc700 document What s in the Box The package includes the following items RS 232 Cable CA 0910 Screw Driv...

Page 2: ...700 The MDC 700 is an Ethernet device which comes with a default IP address of 192 168 255 1 You need first assign a valid IP address of your network to the MDC 700 for accessing the module and using...

Page 3: ...8 255 1 where 192 168 255 1 is the IP address in your MDC module STEP 4 Confirm that the connection is successful on the page The connection to the MDC 700 is established The connection to the MDC 700...

Page 4: ...D pin over 3 seconds The LED display will show RESET as below and the IP address set previously will be removed STEP 6 Restore the IP address for your computer 3 Go to the Web Site Go to the web inter...