Technical support: [email protected]
1
Connecting to PC, Network and Power
The module is equipped with a standard Ethernet port (RJ-45) for
connecting to an Ethernet Hub/Switch and PC. Moreover, you can
also connect the PC directly with an Ethernet cable.
Power
supply
(+10
~
+30V
DC
)
Hub/Switch
2
Assigning an IP address to MDC-700
The MDC-700 is an Ethernet device, which comes with a default
IP address of
192.168.255.1.
You need first assign a valid IP
address of your network to the MDC-700 for accessing the module
and using the built-in web-based interface.
STEP 1:
Power on the computer and the MDC-700.
STEP 2:
Set the IP configuration on your computer.
If the MDC-700 is new, with the default IP address of
192.168.255.1, you must chose an IP address for the
computer in the range of 192.168.255.2 – 192.168.255.253
that is not already in use.
P2