M-7026
M-7026 User Manual Rev: 1.5 Date: 2016/03/10
56
2.17 $AA6N
Description:
This command is used to read the Analog Output value for Analog Output
channel N of a specified module.
Syntax:
$AA6N[CHKSUM](CR)
$
Delimiter character
AA
The address of the module to be read in hexadecimal format (00 to
FF)
6
The command to read the Analog Output value
N
The Analog Output channel to be read, zero based (0-1)
Response:
Valid Command:
!AA(Data)[CHKSUM](CR)
Invalid Command:
?AA[CHKSUM](CR)
!
Delimiter character to indicate a valid command
?
Delimiter character to indicate an invalid command
AA
The address of the responding module in hexadecimal format (00 to
FF)
(Data)
The Analog Output requisition value. See Section 1.9.5 for details of
the data format
There will be no response if the command syntax is incorrect, there is a
communication error, or there is no module with the specified address.
Examples:
Command: #011+10.000
Response: !01
Sets the output value for Analog Output channel 1 of module 01 to
+10.000 (+10.0 V) and returns a response indicating that the command
was successful.
Command: $0161
Response: !01+10.000
Reads the output value for Analog Output channel 1 of module 01 and
returns a response indicating that the command was successful, with a
value of +10.000 (+10.0 V).
Command: $016F
Response: ?01
Attempts to read the Analog Output value from the last #AAN(Data)
command received by Analog Output channel 15 of module 01, but
returns a response indicating that the command was unsuccessful
because Analog Output channel 15 does not exist.
Related Commands:
Section 2.5 #AAN(Data), Section 2.21 $AA8N, Section 2.23 $AA9NTTS
Related Topics:
Summary of Contents for M-7026
