Getting Started:
PAC-5007(P)/5107(P)/5207/5307 Ver. 1.0, 07/2010 ICP DAS
.
2-1
Chapter 2.
Software Programming
2.1 Step 1 – Installing ISaGRAF Software
There are two kinds of software to be installed in PC before user can program on the
PAC-5x07(P) PAC system. They are:
A. ISaGRAF Workbench and
B. ICP DAS Utilities for ISaGRAF
User has to purchase at least one pcs. of ISaGRAF workbench Version 3 (ISaGRAF-256) to
install on his PC to edit, download, monitor & debug the controller system. Item (B) is
free and it is burned inside the CD-ROM which is delivered with the
PAC-5x07(P).
Operating System Requirements:
Before you install the “ISaGRAF Workbench” software, you must install one of the
following operating system:
Windows 95 / Windows 98 / Windows 2000
Windows NT Version 3.51 or Windows NT Version 4.0
Windows XP, Vista or Windows 7
(Please refer to
www.icpdas.com > FAQ > Software > ISaGRAF Ver.3 (Chinese)
Steps to Install the ISaGRAF Workbench:
1.
Insert the ISaGRAF Workbench CD into your CD-ROM drive.
If your computer does not auto-start the installation, use the Windows Explorer and
go to the CD-ROM drive where the Workbench CD is installed.
2.
Double-click on the "install.bat" file listed on the ISaGRAF CD.
If the "install.bat" file is not found on your ISaGRAF CD, then double-click on the
"ISaGRAF.exe" file to start the installation process.
Select the language.
Recommend to use “English” because
this manual uses English version.
Summary of Contents for ISaGRAF mPAC Series
Page 46: ......
