4-12
Getting Started:
PAC-5007(P)/5107(P)/5207/5307 Ver. 1.0, 07/2010 ICP DAS
Please follow the same way to specify all variables to the “Contact” and “Coil”. Later,
remember to click the "Save" button to store the settings (As diagram below).
4.1.7: Connecting the I/O
The ISaGRAF Workbench is an open programming system. This allows user to create
their ISaGRAF program to control a large number of variant PLC controller systems. The
PLC hardware manufacturer should be responsible to embed the “ISaGRAF kernel” in
their respective controller so that the ISaGRAF program operates properly.
The ICP DAS ISaGRAF PAC Series, programmable automatic controller, provides a
powerful and flexible industrial controller system.
Connecting I/O Equipment:
You have created the ISaGRAF example program, now you must connect the "LD1"
example program to the μPAC-5307 I/O controller systems. In this example, we use
μPAC-5307 PAC with an “XW107” I/O expansion board to add digital input and output
channel (Please refer to
).
Click the "I/O Connection" tool button and the "I/O Connection" window will appear.
As diagram below,
1.
Double-click "0" slot, the "Select Board/ Equipment" window will appear.
Summary of Contents for I-8417
Page 46: ......
