ICP DAS USA I-8124W, User Manual

Page: 16 / 111

I-8124W DeviceNet Master API functions User’s Manual (V 1.6) 2021/10/04 16
1.7 Features
Hardware Features

CPU : 80186-80 MHz or compatible.

CAN Port : 5-pin screwed terminal block (CAN_L, CAN_GND, CAN_H,
N/A for others).

CAN Controller : NXP SJA1000T with 16M Hz clock.

CAN Transceiver : NXP 82C250.

Isolation : 3000 VDC for DC-to-DC, 2500 Vrms for photo-couple.

Specification : ISO-11898-2, CAN 2.0A and CAN 2.0B.

3 indicating LED (RUN, NS and MS).

Terminator resistor : Switch
select 120Ω terminator resistor.

Power Consumption : 2W.

Operating Temperature : -25 ~ 75°C

Storage Temperature : -40 ~ 80°C

Humidity : 5 ~ 95% RH, non-condensing

Support PAC : ViewPAC, WinPAC, XPAC, XPAC-Atom series.
DeviceNet Firmware Features

Programmable Master MAC ID.

Programmable transfer-rate 125 kbps , 250 kbps, 500 kbps.

Each port support maximum nodes up to 64

Support Group 2 and UCMM functions

Predefined Master-Slave Connection Set

The maximum Fragment number is (Input/Output) up to 64

Support I/O Operation Mode: Poll, Bit-Strobe and Change Of
State/Cyclic

Support Auto-Scan slave device function.

Support on-line adding and removing devices.

Support Auto-Reconnect when the connection is broken.