I-8124W DeviceNet Master API functions User’s Manual (V 1.6) 2021/10/04
15
The I-8124W
firmware has a “ScanList” which is used for store the remote
slave devices information. After adding or removing a slave device into
firmware by APIs, the firmware will save immediately this information into
“ScanList” and update the EEPROM information. You don’t need to reboot for
this operation. When you reboot I-8124W next time, it will load the
“ScanList”
information from EEPROM again and run with the slaves by following the
“ScanList” information. Users can easily use the DLL functions or Utility tools
to configure it by calling
“add device” or “remote device” functions. It works as
following Figure 1.7.
Figure 1.7 ScanList data structure
