I-7565 USB/CAN Converter Quick Start User Guide (Version 1.0, March/2007) ------ 6
the command string with ASCII 0x0d, and send it out through the
PC USB port. After the I-7565 A receives this command. It will
transfer the message to the CAN message. So, the I-7565 B will
receive the CAN message transmitted from I-7565 A. Then,
convert this CAN message to the USB port of PC and send it out
to another USB port on the PC. Detailed steps of this are shown in
the following figure.
Utility A Utility B
④
①
③
②
Step6: Similarly, the user can directly type the command string,
“t0013AABBCC”, into the EditBox on Utility B. Click the “Send”
button to send this command to I-7565 B via the PC’s USB port.
When the user sends the message, Utility B will add the ASCII
0x0d to the end of the command string filed in the EditBox. Then
the Utility will convert this message into a CAN message. After that,
the I-7565 A will receive a CAN message and convert it into the
command string. When the PC’s USB port receives the command,
the results will be shown on Utility A. The details of this procedure
are depicted in the below figure.
Utility A Utility B
③
①
②
