I-7565 USB/CAN Converter Quick Start User Guide (Version 1.0, March/2007) ------ 3
3. The I-7565 Parameters Configuration
Before starting the I-7565 converter tests, users need to configure the
USB & CAN parameters via the I-7565 Utility tool. The details of this
procedure are shown below.
Step1: Set the Init/Normal switches on the back of the I-7565 A to the
“Init” position. Then, connect to the USB port of PC. The ON LED
of the I-7565 A will be flash approximately once per second. That
means that the I-7565 is in the configuration mode.
Step2: Run the I-7565 Utility. The “I7565.exe” is located in the
can_cd\can\converter\i-7565\ folder on the companion CD-ROM or
can be downloaded from the web site:
http://ftp.icpdas.com/pub/cd/can_cd/can/converter/i-7565/utility/
Step3: Click the “Connect” icon to select the USB port and Baud rate,
which are used to connect with the I-7565 A. The steps are shown
in the following figure.
①
②
③
