I-7530, I-7530A, I-7565, I-7530-FT, tM-7530, tM-7530A, tM-7565 User Manual Version 1.6
Page:
51
Copyright © 2018 ICP DAS Co., Ltd. All Rights Reserved E-mail: [email protected]
3.6 Testing interface
Step 1. Set the Init/Normal of DIP switch in the CAN converter to Normal mode, and
power on the CAN converter again.
Step 2. Connect the COM port of the PC to the CAN converter and execute the
VxCAN Utility.
Step 3. Click the search button
to search for all CAN converters connected to
the PC.
Step 4. The search list on the left will list the CAN modules that have been
searched by the PC.
Step 5. Click the CAN communication port of the CAN converter and select the parameters
be used of the CAN
converter, and then check the “Active Port” and click the “Confirm”
button.
