P3
3
Install the DCON Utility Pro
The DCON Utility Pro can be obtained via FTP from the address below
or by scanning the QR code:
http://ftp.icpdas.com/pub/cd/8000cd/napdos/driver/dcon_utility/
4
Set the Communication Parameters
1
2
Page 1: ...M 7018Z G S and M 7019Z G S DN 1822 and CA 252518D 1 are for I 7018Z G S2 M 7018Z G S2 and M 7019Z G S2 DN 1823 and CA 2525015D are for I 7018Z G S3 M 7018Z G S3 and M 7019Z G S3 DN 8P8C CA 090910 A a...
Page 2: ...guration mode 2 Connect to the PC and the Power Supply Note You should only connect a single I 7000 M 7000 module to the RS 485 bus during the configuration process 1 Using an RS 232 to RS 485 Convert...
Page 3: ...DCON Utility Pro The DCON Utility Pro can be obtained via FTP from the address below or by scanning the QR code http ftp icpdas com pub cd 8000cd napdos driver dcon_utility 4 Set the Communication Pa...
Page 4: ...ition or disconnect the INIT to the GND then reboot the module to apply the new configuration Also search for the module again to confirm that the new configuration is correct and that the module can...
