I-7080, I-7080D, I-7080B, I7080BD User Manual (V 2.2) ------------------ 70
2.46
@AAPA(data)
Description
: Set alarm limit of counter 0(for alarm-mode 0).
Refer to Sec. 1.8.2 for more information.
Syntax
: @AAPA(data)[chk](cr)
@ is a delimiter character
AA=2-character HEX module address, from 00 to FF
(data)=8-character HEX value.
[chk]=2-character checksum, if checksum disable
no [chk]
(cr)=0x0D
Response
: valid command
!AA[chk](cr)
invalid command
?AA[chk](cr)
no response
syntax error or communication
error or address error
! is a delimiter character indicating a valid command
? is a delimiter character indicating a invalid command
AA=2-character HEX module address
[chk]=2-character checksum, if checksum disable
no [chk]
(cr)=0x0D
Example
:
command: @01PAFFFF0000(cr)
response : !01(cr)
command: @02PA0000FFFF(cr)
response : !02(cr)
The alarm limit of counter-
0 is FFFF0000.
The alarm limit of counter 0
is 0000FFFF.
7080/7080D