![background image](http://html2.mh-extra.com/html/icp-das-usa/i-2533t-fd/i-2533t-fd_user-manual_3528565014.webp)
I-2533T-FD ( CAN/CAN FD to Multi-mode Fiber Bridge ) User Manual (version 1.0.0)
Page: 14
Copyright © 2021 ICP DAS Co., Ltd. All Rights Reserved. E-mail: [email protected]
2.4. 10-pin Dip Switch
When users would like to set the CAN/CAN FD baud rate, module’s group id or
update the firmware of the I-2533T-FD, Users can use the 10-pin dip switch on the
upper of the power connector to achieve these purposes. Users can find it on the top of
the power connector.
Figure 2-4-1 Location of 10-pin Dip Switch