1.
Introduction
The I-2533CS series (I-2533CS, I-2533CS-60, I-2533CS-A and I-2533CS-B) is a
local CAN bridge used to establish a connection between two CAN bus system via
single mode fiber optic transmission medium. In order to solve the problem between
CAN and fiber transmission medium, The I-2533CS series is specially designed for
converting the electrical CAN bus signal to fiber optic cables. Besides, I-2533CS series
has three more important features.
First, the transmission distance limitation of the CAN bus system will not affected
due to the different CAN baud rate. It means that the total CAN bus working distance
can be extended. Second, the bus error on one CAN network will not affect the
operation of another CAN network. Finally, the two CAN network can communication
with each other by using different CAN baud rate for highly flexibility.
I-2533CS series CAN to Single Mode Fiber Bridge User Manual (version 1.0.0)
Page: 4
Copyright © 2013 ICP DAS Co., Ltd. All Rights Reserved. E-mail: [email protected]
The mainly difference between I-2533 and I-2533CS series are fiber connectors
and transmission distance. The I-2533CS series is designed for single mode fiber, and
allow to extern CAN bus to maximum 30 km. Besides, I-2533CS provides the group
function, which is the basic message router. Users can decide the CAN message flows
between several CAN bus systems. I-2533CS series also provides the utility tool for
user-defined baud rate and filter configuration. By using this tool, it is allowed to have
user-defined baud rate and CAN message filter. When users use the I-2533CS series
on two CAN network with different CAN baud rate, it may be useful to reduce the bus
loading of the network which has low baud rate.
ГК
Атлант
Инжиниринг
–
официальный
представитель
в
РФ
и
СНГ
+7(495)109-02-08 [email protected] www.bbrc.ru
