ICP DAS USA FSM-510G series, User Manual, Page: 16 / 99

16
Power Connection
The DC power interface is a 6-pin terminal block with polarity signs on the top panel.
The FSM-510G can be powered from two power supply (input range 12V – 58V). The DC power
connector is a 6-pin terminal block; There is
alarm contact on the middle terminal block.
Refer to Table
1
for the normal operational LED status.
Note: 1. The DC power should be connected to a well-fused power supply.
Power Connector (6P Terminal Block)
Input DC 12-58V
PWR1 +/- Power Input 1 +/-
PWR2 +/- Power Input 2 +/-
ALM Alarm relay output