FRB-200U/200/100 User Manual (Ver.1.3, Jun.2008, fmh-001-12) ---- 17
5. Software Installation
The FRB-200U/200/100 can be used in DOS and Windows
98/Me/NT/2000/XP. For Windows O.S, the recommended installation steps
are given in Sec 5.1 ~ 5.2
5.1
Software Installing Procedure
Step 1: Insert the companion CD into the CD-ROM driver and wait a few
seconds until the installation program starts automatically. If it does
not start automatically for some reason, then please double-click the
file 8000\NAPDOS\AUTO32.EXE on the CD.
Step 2: Click the item: Install Toolkits (Software) / Manuals.
Step 3: Click the item: FRnet Series Toolkits.
Step 4: Click the item: FRnet PCI Cards.
Step 5: Click FRB-200U/200/100.
Step 6: Click “install Toolkit for Windows 98(or NT, 2K/XP)”.
Then, the InstallShield will start the driver installation process to copy the
related material to the indicated directory and register the driver on your
computer. The driver target directory is as below for different systems.
Windows NT/2000/XP :
The FRB.dll will be copied onto c:\winnt\system32
The Napwnt.sys and FRB.sys will be copied into c:\winnt\system32\drivers
Windows 95/98/Me :
The FRB.DLL,and FRB.Vxd will be copied onto c:\windows\system
5.2
PnP Driver Installation
After installing the hardware (FRB-200U/200/100) and you turn the power
on for your PC, Windows 98/Me/2000/XP will find a PCI card device and then
ask the user to provide FRB.inf to install the hardware driver onto the
computer. If the user has trouble in procedure through this process, please
refer to PnPinstall.pdf for more information.
ГК
Атлант
Инжиниринг
–
официальный
представитель
в
РФ
и
СНГ
+7(495)109-02-08 [email protected] www.bbrc.ru
