The following DIP switch statuses present the condition if the terminator resistor is
active (default) or inactive.
Figure 2-11 Adjustment of Terminal Resistance
Generally, if your application is as follows, we recommend you to enable the
terminator resistor.
Figure 2-12 Application 1
If your application is like the structure as follows, the terminator resistor is not
needed.
Figure 2-13 Application 1
CAN-Logger series CAN Bus data logger devices User Manual (version 1.0.1)
Page: 15
Copyright © 2015 ICP DAS Co., Ltd. All Rights Reserved. E-mail: [email protected]