BLE-USB Quick Start v1.2, 2017/04/19
6/8
Step2
:
Open the COM Port (the default baud rate is 115200), and click the “Next” button.
Figure 4-12 open the COM port
Step3
:
You need one Broadcaster(Advertiser) and one Scanner (Observer) in the test.
Skip the connection
parameter setting. The broadcast channel and group ID must be same in the Advertiser and Observer.
Figure 4-13 change the connection parameter
Step4
:
Enable or disable the Mater identify mechanism (refer to
Figure 4-5
). The identify key must be same
in the Master and slave. The concept of Mater identify mechanism can refer to the user manual (Chapter 1.6).
Step5
:
Change the “Send Mode” to the
Broadcast mode
, and click “Upload Setting” button. The utility will
upload the setting to the BLE-USB.
Figure 4-14 change to broadcast mode and Upload the setting
1
2
3
1
2
3
4
1
2
3
