BLE-USB Quick Start v1.2, 2017/04/19
3/8
i.
Connection Mode
It needs two devices in the connection test. One is the Master; the others are slaves. Make sure the Group
ID is same.
The BLE-USB needs setting before the test. Please follow the procedure below:
Step1
:
Open the tBLE-720/BLE-USB utility, open the “Basic Parameter Setting” page.
Figure 4-2 open the basic parameter setting page
Step2
:
Open the COM Port (the default baud rate is 115200), and click the “Next” button.
Figure 4-3 open the COM port
Step3
:
Skip the broadcast parameter setting.
You need one Master and one Slave in the test.
You also can
change the “Group ID”.
Figure 4-4 change the connection parameter
1
2
3
4
1
2
3
4
