2.10 ~AAO(name)
z
Description
: Set module name.
z
Syntax
: ~AAO(name)[chk](cr)
~ is a delimiter character
AA=2-character HEX module address, from 00 to FF
(name)=4-character/5-character module name
[chk]=2-character checksum, if checksum disable
Æ
no [chk]
(cr)=0x0D
z
Response
: valid command
Æ
!AA[chk](cr)
invalid
command
Æ
?AA[chk](cr)
no response
Æ
syntax error or communication
error or address error
! is a delimiter character indicating a valid command
? is a delimiter character indicating a invalid command
AA=2-character HEX module address
[chk]=2-character checksum, if checksum disable
Æ
no [chk]
(cr)=0x0D
z
Example
:
command: $01M(cr)
response : !017083(cr)
command: ~01O8083(cr)
response : !01(cr)
command: $01M(cr)
response : !017083D(cr)
command: ~01O8083D(cr)
response : !01(cr)
Change module name from
7083 to 8083
Note
: This command is designed for OEM/ODM user. The user
can use it to change the module name for other purpose.
Change module name from
7083D to 8083D
I-7083/7083D/7083B/7083BD User Manual (V 1.1, Dec/2007) ------------------ 34