ICP CON I-7188XC Series, User Manual

Page: 90 / 150

Alt_F10
Downloads all files specified by ALT_F2 to the SRAM memory
Ctrl_B
Sends a BREAK signal to the COM port of the Host PC that is
currently being used by 7188xw.exe
More…
For more detailed information regarding the 7188xw.exe application,
please refer to the index.htm file in the
CD:\Napdos\MiniOS7\document\Lib_Manual_For_7188XABC\
folder or at
http://ftp.icpdas.com.tw/pub/cd/8000cd/napdos/minios7/document/lib_
manual_for_7188xabc/ on the web.
Downloading a file to the I-7188XC(D) controller using the
7188xw.exe application
Step 1: Power-off the I-7188XC(D). Connect the INIT* pin to the GND
pin and power-on the I-7188XC(D) at the same time.
Step 2: After the I-7188XC(D) has been switched on, disconnect the
INIT* pin from the GND pin.
Step 3: Open an MS-DOS command prompt window using the steps
shown bellow.
I-7188XC Series User’s Manual(Ver.1.0, Apr/2007,7MH-21-10) ---
90