INSTRUCTION MANUAL
For MODELS R08A Twin & RO8B Compact
SET UP & OPERATING INSTRUCTIONS
1
. If using the standard iCool pool, inflate the pool with the foot pump provided
(
A
)
by connecting
the pump to each of the 3 inflation vales
(
B
)
in turn. Start with the bottom one. Inflate until pool is
nice and firm to touch. The correct inflation firmness is fairly obvious.
Do not over inflate
.
2
. If using one of the larger iCool pools, please follow the separate set up instructions that came
with that pool.
You can also use standard baths and spa pools providing they have a water outlet at he bottom,
that is lower than the ‘WATER IN” connector on the cooling system and the hose is flat on the
ground to prevent air being trapped.
3
. Whichever pool or spa you use, it is essential that water can flow freely from the pool to the
inlet of the cooling unit’s ‘WATER IN” connector by gravity alone, otherwise the pump will not be
able to start and maintain the necessary flow.
4
. Set up both the Pool and your Cooling unit on a level surface and both at the the same level.
The system can not pick up and circulate the cooling water if the Cooling unit is higher than the
Pool
(
A
)
(
B
)
(
C
)
(
D
)
(E
)
(F
)
(F
)
5
. Connect the water hoses
(
C
)
to the Pool using the quick snap connectors
(
D
)
provided.
6
. Connect the water hoses
(
C
)
to the Cooling System according to the instructions on the
water connector panel
(E
)
on the Cooling System
Make certain that the hose from the bot-
tom of the pool goes to the bottom inlet on the Cooling System
(G
)
(H
)
(I )
GO TO NEXT PAGE
Water Inlet and Outlet Panel
Optimum water level
AC Power Inlet
