IC
L
ive
Operators Guide
IC
L
ive
Operators Guide
Page 4
Page 9
Assembly
IC Live is a building block system designed for easy
transportation, setup and teardown. It provides for 6
system configurations from two basic modules, the
ICL-R array module and the IC215S-R subwoofer.
Setup couldn’t be easier. To create a stacked array
from two ICL-R modules:
1. Stand the two column arrays side by side and
remove the two joining bars and their short quick
release pins from the modules.
2.
Place one of the modules on top of the other one.
Note that the top module should be turned upside
down so the horn sections of the two modules are
together.
3.
Align the two modules and then remove the quick
release pin from the upper module’s rear cylinder
to allow its inner sleeve to drop down into the lower
module’s rear cylinder.
4.
Then re-insert the quick release pin into the upper
module’s cylinder to lock the inner sleeve in place.
ICL-R Presets (continued)
Preset 21
Stacked (Dual) ICL-R array
with a 20 degree opening
angle; provides better
directivity control and higher
sound levels in venues with
100 foot deep audience
areas than a single ICL-R
array.
Preset 22
Stacked (Dual) ICL-R Array
with a 15 degree opening
angle; suggested for
venues with 125 foot deep
audience areas.
Preset 23
ICL-R with a 10 degree
opening angle; suggested
for venues having audience
areas more than 125 feet
deep.
