background image

Digitally Steerable Line Array Loudspeaker Systems

IC 

L

ive

 

ICL-R

Digitally Steerable Line Array

IC215S-R

Dual 15 Inch Subwoofer

OPERATORS GUIDE

ICL-R Preset Listing

Single Array

10 - Factory preset to ‘flat” and locked; for use in aural testing of transducers

11 - Beams factory preset for 50 foot throw and locked; DSP settings are not locked *

12 - Beams factory preset for 75 foot throw and locked; DSP settings are not locked *

13 - Beams factory preset for 100 foot throw and locked; DSP settings are not locked *   

14  -  See  Note  ________________________________________________________________________     

       ________________________________________________________________________________

15  -  ________________________________________________________________________________      

       ________________________________________________________________________________

16 - ________________________________________________________________________________

       ________________________________________________________________________________

17 - ________________________________________________________________________________

       ________________________________________________________________________________

18 - ________________________________________________________________________________

       ________________________________________________________________________________

19 - ________________________________________________________________________________

       ________________________________________________________________________________

Stacked Arrays

20 - Factory preset to ‘flat” and locked; for use in aural testing of transducers.

21 - Beams factory preset for 100 foot throw and locked; DSP settings are not locked *

22 - Beams factory preset for 125 foot throw and locked; DSP settings are not locked *

23 - Beams factory preset for 150 foot throw and locked; DSP settings are not locked *     

24 - See Note ________________________________________________________________________

       ________________________________________________________________________________

25 - ________________________________________________________________________________

       ________________________________________________________________________________

26 - ________________________________________________________________________________

       ________________________________________________________________________________

27 - ________________________________________________________________________________

       ________________________________________________________________________________

28 - ________________________________________________________________________________

       ________________________________________________________________________________

29 - ________________________________________________________________________________

       ________________________________________________________________________________

* Factory installed presets do not include DSP settings and are left open so DSP settings can be added. 

Note. Bean steering information is loaded into Preset 14 (24) by quality assurance during final 

performance testing to verify proper software/DSP operation. It is not locked and may be changed.

IC 

L

ive 

Operators Guide

RH 651 Rev E   August 2011

19201 Cook Street, Foothill Ranch, CA USA • Phone: +1 949 588 9997 • Fax: +1 949 588 9514

[email protected] • www.renkus-heinz.com

Summary of Contents for ICL-R













Reviews: