Using the TouchScreen
9
The Security app displays a keypad.
The TouchScreen beeps audibly once every second, until the last 10 seconds when it beeps twice a
second.
If a valid keypad code is not entered by the end of the Entry Delay period, an alarm sounds. From the
time an alarm sounds (or starts silently), for most reasons, you have 30 seconds (default) to enter a valid
keypad code to disarm the system and prevent an alarm being sent to the central monitoring station.
This is called the Alarm Transmission delay or the Abort Window.
The Alarm Transmission Delay is a required period that prevents a report to the central station during an
alarm was triggered innocently.
IMPORTANT:
Emergency alarms (see page
10
) and smoke alarms are reported without an Alarm
Transmission delay or an Entry Delay. Consult Customer Care to understand the
number of seconds configured for the Alarm Transmission Delay in your system.
To disarm the system from the TouchScreen:
1. Tap the Security Status header when it is in Armed state.
The Security app is displayed with a keypad and the Disarm System tab active.
2. Enter your security code.
