Front Panel
Rear Panel
24V
D
C
/ 0.
5A
LAN
/ P
oE
P
ower
ov
er
E
ther
ne
t
(802.
3af
c
om
pliant
) or
24VDC
/ 0
.5
A
M
anuf
act
ured
in
Taiwan
W
W
W
.S
AVA
N
T.CO
M
A
B
J
I
H
G
F
E
D
C
C
A
Proximity Sensor
Sensor (proximity) mounted in front panel
will wake up the display when movement is
detected in front of display.
Sensor operating at 940 nm, affective range
about 3.28 ft (1 m).
B
Display
Screen Size: 5.5 in (13.77 cm).
Resolution: 1920 x 1080 | 16.7M colors
C
Embedded
Speaker
For audio output.
D
Mounting Slots
Slots for mounting touch panel to mounting
bracket. Insert tabs from the mounting
bracket into these slots. Once inserted, secure
the touch panel to the bracket using the two
captive screws.
E
Link LED
Orange
- Link is established.
Off
– No link established
F
Link Activity LED
Green Blinking
- Indicates data activity.
Off
– No Activity
G
Ethernet
8-pin RJ-45 port: 10/100/1000 Base-T auto-
negotiation port with link and activity LEDs.
H
Alternate
Power Input
Not Used.
I
Reset Button
Using a paperclip or similar, press and release
Reset button to reset the display.
J
Embedded
Microphone
For voice input.
Network Changes
If the IP Address range in your network has changed, Savant
recommends the following steps to refresh any IP connection and
ensure that the display is communicating with the network correctly.
–
Reboot the device for the Settings Menu. Navigate from the Home
Screen to
Settings > Touch Panel Settings > Reboot
.
Savant ITP-E5500x-30 QRG | 009-1935-01
1 of 2
45 Perseverance Way, Hyannis, MA 02601
200609 | © 2020 Savant Systems, LLC
Box Contents
(1) Touch 5.5 Inch Control Screen (ITP-E5500x-30)
(1) Installation Kit
(1) Mounting Bracket (For standard 1-gang electrical box)
(2) Mounting Bracket Screws (6-32 x 1 in.)
(1) Regulatory Statement (009-1950-xx)
Specifications
Environmental
Temperature
32° to 104° F (0° to 40° C)
Humidity
10% to 90% Relative Humidity (non-condensing)
Dimensions and Weights
Height
5.85 in (14.86 cm)
Width
3.44 in (8.74 cm)
Depth
Device: 1.33 in (3.38 cm)
Mounting: 0.56 in (1.42 cm)
Weight
Net: 0.35 lb (0.16 kg)
Shipping: 0.75 lb (0.34 kg)
Power
Power over
Ethernet (PoE)
802.3af compliant
Power
Consumption
Average: 4.6W
Maximum: 5.5W
Compliance
Safety and
Emissions
FCC Part 15
CE
WEEE
RoHS
Compliant
Minimum Supported Release
Savant OS
da Vinci 9.2.2
Network Requirements
Savant requires the use of business class/commercial grade network
equipment throughout the network to ensure the reliability of
communication between devices. These higher quality components
also allow for more accurate troubleshooting when needed. Connect
all Savant devices to the same local area network (LAN) or subnet as
the Host. Savant recommends not implementing any type of traffic
management, packet shaping, or similar within the network topology
for Savant devices, as this may interfere with performance.
Network Configuration
To ensure that IP addresses do not change due to power outage
or other network interruptions, Savant recommends using DHCP
reservation at the router. Using this method, all IP addressing can
be managed from a single UI, avoiding the need to access devices
individually.
–
Using a paper clip or similar, press and release the Reset button on
the side of the touch panel (See Rear Panel descriptions section).
Allow the display to reset and obtain a new IP Address.
Savant Touch 5.5 Inch Control Screen (ITP-E5500x-30)
Quick Reference Guide
