Mio X-Series User Guide
Page 14
mioXL User Interface
The interactive Touch Panel on the front of the mioXL is an integrated touch sensitive
controller with two rows of status LEDs. The Touch Panel, combined with the OLED Display
and Parameter/Power Knob, are referred to collectively as the User Interface (UI). The UI
controls various configuration parameters and modes of mioXL operation. This section will
discuss the operation of the various UI elements.
Parameter/Power Knob
The Parameter/Power Knob to the right of the display is a dual-purpose knob/pushbutton and
performs various functions as it is rotated and pressed. To make reading easier, we will refer
to it as the “Parameter Knob”, “Parameter Button”, or “Power Button”, depending on the
operation being performed.
One of the primary pushbutton functions is to set the current mioX mode of operation:
•
Powering On
: If the mioXL is currently in a Power Off state, quickly press and release
the Power Button to power up the interface into Normal Mode. On start-up, mioXL will
light the LEDs in a sequence of green and red colors and then display its banner page
(the product name and firmware version number) for a few seconds:
The display give way to the current memory preset number and preset name. The mioXL
is now in Normal Mode.
