IC
L
ive Users Manual - Models ICL-R & IC215S-R
10
Master/Slave Setup Switches
Master/Slave Link Cable Connector
Analog 1 - AES/EBU Input Connector
Looping Analog -AES/EBU Connector
Primary Ethernet Input Connector
Preset Controls
Operating Controls
Looping AC Power Connector
90/260 V AC Power Connector
AES/EBU Input Selector
Notice that on the ICL-R the Analog and AES/EBU inputs share common input connectors. The AES/EBU Input Selector switches the
amplifier between Analog and AES/EBU input modes. On the IC215S-R, the inputs are separate.
Important: If you are working with a stacked array and one or two subwoofers, make sure your power source (power strip) is
adequate to handle the power drain. A stacked array will draw up to 13 Amps at 120 Volts and each IC215S-R needs a 15 Amp
source.
Analog 1 Input
&
Looping Output
Primary Ethernet Input Connector
Mute Controls
AC Power Connector
AES/EBU Input
Array Connections
The ICL-R array and IC215S-R Subwoofer Input/Control panels are shown below
.
ICL-R
Control Panel
IC215S-R
Input / Control Panel
Power On / Off
IC215S-R
Power Control Panel
Level Controls
Signal Present & Clip
Status Indicators
