HD-RH1 User Manual
Operation
13
Selecting a Format and Rate: Front Panel
Press and Hold buttons to cycle
through options
1.
Press and hold the
FORMAT
key on the front panel to cycle through the format
options.
2.
When the desired Format LED is lit, release the button. The Format is not selected
until the button is released. If the button is released on the format or rate that was
already active, nothing changes.
3.
Press and hold the
RATE
key on the front panel to cycle through the available rates.
4.
When the desired Rate LED is lit, release the button. The Rate is not selected until the
button is released.
OPERATIONAL NOTES:
•
See the
Video Output Menu
section for a list of the rates available for each format.
•
Only those rates valid for a format are available for selection.
•
The
30
rate is only available from the Video Output menu. There is no LED indicator
on the front panel. If no LED is illuminated for
RATE
, then 30/29.97 is assumed.
•
If
F/P RATE
mode is
1.001
in the Video Output menu, the whole number on the front
panel represents the fractional rate. For example, when
1.001
is active, and
60
is
selected on the front panel, 59.94Hz is the actual result. The factory default setting
for
F/P RATE
is
1.001
. To use the front panel to select a non-fractional rate, first set
the
F/P RATE
to
1
. (See
Video Output Menu
section.)
•
The 720p format in rates 23.98 through 30 has the option of being frame-doubled to a
faster output rate. For example, 25-frame content can be output on a 50-frame signal.
For quick operation from the front panel this mode is enabled or disabled by the
F/P
720P CARR
option in the
Video Output
menu.
•
A format/rate setting in the menu replaces the front panel setting and vice-versa.
